MODEL FEATURES
 |
Bright LED Display
-- Illuminated display is easy to see under all lighting conditions.
|
 |
Tactile Keycaps
-- Easy-to-use and less fatiguing then membrane keyboards, these keys provide clear tactile feedback when depressed.
|
 |
Three Speed Selections
-- Any three speeds from 600 to 1,600 (in increments of 200) can be preset and selected as desired.
|
 |
Auto Start and Restart
-- JetCount® starts as soon as notes are added to the hopper and automatically restarts when
notes are removed from the bottom stacker.
|
 |
Communications --
Activates ports for one or two devices including computers, printers and remote displays.
|
 |
Unit/Value Display
-- Totals can be shown as value (euros, dollars, etc.) and unit counts.
|
 |
Fail Safe Error Detection
-- Senses double notes, folded notes, chains and jams to ensure accurate counts.
|
 |
Add/Clear Control
-- Provides totals of multiple batches or automatically clears total with each batch.
|
OPTIONS AND ACCESSORIES
 |
Multiple Country Option
-- Allows you to toggle between up to 10 different countries' currencies.
|
 |
Thread Detection
-- Detects presence or absence of a continuous metallic thread. (Not available on all models.)
|
 |
3D Sensors
-- Provides settings for height, width and thickness detection. (Not available on all models.)
|
 |
Magnetic Ink Sensors
-- Special magnetic sensors measure the level of magnetic ink. When a suspect
note is processed, it activates an alarm and stops the counter. (Not available on all models.)
|
 |
Enhanced Ultraviolet Sensors
-- Sensors test paper for fluorescence and stop on each suspect
note. Uses patented techniques that detect counterfeit
notes that are often missed by other competitive counters equipped with UV detection. (Not available on all models.)
|
 |
High Capacity Hopper
-- Holds up to 700 notes.
|
 |
Remote Display
-- Large, red LED display shows currency totals for customer viewing.
|
 |
Printer
-- Provides permanent, easy-to-read record of currency processed.
|
SPECIFICATIONS*
Counting Speed -- 3 selectable speeds - from 600 to 1,600
notes per minute.
Batch Settings -- Preset: 5, 10, 20, 25, 50, 75, 100; or adjust from 1 to 100.
Top Hopper Capacity -- 500 circulated notes.
Stacker Capacity -- 150 notes.
Modes -- Unit Count, Value Count and Add Mode.
Size -- 24 cm H (without hopper) x 27 cm W x 30.5 cm D
Weight -- 7 kilograms.
Document Size -- Height: 6.12 cm to 9.65 cm
Length:
11.43 cm to 17.78 cm
Power -- Voltage operating ranges are either 198-253v or 105-130v. Frequency is 50/60Hz. Customer must provide an electrical supply properly grounded and protected by a circuit breaker in accordance with applicable electrical code. This equipment must be plugged into a properly grounded outlet.
Power consumption (full load amps) at nominal voltage: 0.3 Amps (220v); 0.6 Amps (120v).
Power disruptions that result in input voltage other than the power requirements listed can lead to improper operation of this device or result in failure/damage to electrical components. (Power disruptions are not covered under machine warranty or preventative maintenance agreement.) Power conditioning/stabilizing devices are available through Cummins.
*Specifications provided are approximate and subject to change without notice.
|