Bright LED Display -- Illuminated display is easy to see under all lighting conditions.
	Tactile Keycaps -- Easy to use and less fatiguing than membrane keyboards, these keys provide clear tactile feedback when depressed.
	Three Speed Selections -- Any three counting speeds from 600 to 1,600 (in increments of 200) can be preset and selected as desired.
	Auto Start & Restart -- The JetCount® currency counter starts as soon as bills are added to the hopper and automatically restarts when bills are removed from the bottom stacker.
	Protected Data and Set-Ups -- All processing data and set-ups are protected during low power and power loss situations.
	Short Paper Path -- Minimizes jams and allows easy removal of bills and makes cleaning easy.
	Unit/Value Display -- Totals can be shown as dollar value and unit counts.
	Fail-Safe Error Detection -- Senses double bills, folded bills, chains and jams to assure accurate counts.
	Add/Clear Control -- Provides totals of multiple batches or automatically clears total with each batch.

OPTIONS AND ACCESSORIES

	Magnetic Ink Sensors -- Special magnetic sensors measure the level of magnetic ink. When a suspect bill is processed, it activates an alarm and stops the currency counter. (Not available on all models.)
	Enhanced Ultraviolet Sensors -- Sensors test paper for fluorescence and stop on each suspect bill. Uses patented techniques that detect counterfeit bills that are often missed by other competitive currency counters equipped with UV detection. (Not available on all models.)
	High Capacity Hopper -- Holds up to 700 bills.
	Remote Display -- Large, red LED display shows currency totals for customer viewing.
	Printer -- Provides permanent, easy-to-read record of currency processing transactions.
	Communications -- Activates ports for one or two devices including computers, printers and remote displays.
	Carrying Handle -- Sturdy handle allows for easy transport of the JetCount currency counter.

SPECIFICATIONS*

Speed -- 3 selectable speeds -- from 600 to 1,600 bills per minute.

Batch Settings -- Preset: 5, 10, 20, 25, 50, 75, 100; or adjust from 1 to 100.

Top Hopper Capacity -- 300 circulated bills.

Modes -- Unit count and add mode.

Size -- 9.5" H (without hopper) x 10.75" W x 12" D

Weight -- 15 pounds.

Document Size -- Height: 2.41" to 3.8"
                             Length: 4.5" to 7"

Power -- Voltage operating ranges are either 105-130v or 198-253v. Frequency is 60/50Hz. Customer must provide an electrical supply properly grounded and protected by a circuit breaker in accordance with applicable electrical code. This equipment must be plugged into a properly grounded outlet. 

Power consumption (full load amps) at nominal voltage: 0.6 Amps (120v); 0.3 Amps (220v). 

Power disruptions that result in input voltage other than the power requirements listed can lead to improper operation of this device or result in failure/damage to electrical components. (Power disruptions are not covered under machine warranty or preventative maintenance agreement.) Power conditioning/stabilizing devices are available through Cummins.


*Specifications provided are approximate and subject to change without notice.